Not exported by the zlib module. It is documented here because it is the base class of the compressor/decompressor classes.

Methods

flush(callback:() ‑> Void):Void

flush(kind:Int, callback:() ‑> Void):Void

Flush pending data.

kind defaults to Zlib.Z_FULL_FLUSH.

Don't call this frivolously, premature flushes negatively impact the effectiveness of the compression algorithm.

params(level:Int, strategy:Int, callback:() ‑> Void):Void

Dynamically update the compression level and compression strategy. Only applicable to deflate algorithm.

reset():Void

Reset the compressor/decompressor to factory defaults. Only applicable to the inflate and deflate algorithms.

Inherited Variables

Defined by Duplex

read onlywritable:Bool

Is true if it is safe to call writable.write().

See also:

read onlywritableEnded:Bool

Is true after writable.end() has been called. This property does not indicate whether the data has been flushed, for this use writable.writableFinished instead.

See also:

read onlywritableFinished:Bool

Is set to true immediately before the 'finish' event is emitted.

See also:

read onlywritableLength:Int

This property contains the number of bytes (or objects) in the queue ready to be written. The value provides introspection data regarding the status of the highWaterMark.

See also:

read onlywritableObjectMode:Bool

Getter for the property objectMode of a given Writable stream.

See also:

read onlywritablehighWaterMark:Int

Return the value of highWaterMark passed when constructing this Writable.

See also:

Defined by Readable

read onlydestroyed:Bool

Is true after readable.destroy() has been called.

See also:

read onlyisTTY:Bool

Terminal read streams (i.e. process.stdin) have this property set to true. It is false for any other read streams.

See also:

read onlyreadable:Bool

Is true if it is safe to call readable.read().

See also:

read onlyreadableEncoding:Null<String>

Getter for the property encoding of a given Readable stream. The encoding property can be set using the readable.setEncoding() method.

See also:

read onlyreadableHighWaterMark:Int

Returns the value of highWaterMark passed when constructing this Readable.

See also:

read onlyreadableLength:Int

This property contains the number of bytes (or objects) in the queue ready to be read. The value provides introspection data regarding the status of the highWaterMark.

See also:

read onlyreadableObjectMode:Bool

Getter for the property objectMode of a given Readable stream.

See also:

Inherited Methods

Defined by Transform

Defined by Duplex

cork():Void

The writable.cork() method forces all written data to be buffered in memory. The buffered data will be flushed when either the stream.uncork() or stream.end() methods are called.

See also:

destroy(?error:Error):TSelf

Destroy the stream. Optionally emit an 'error' event, and emit a 'close' event unless emitClose is set in false.

See also:

end(chunk:Dynamic, ?encoding:String, ?callback:EitherType<() ‑> Void, Null<Error> ‑> Void>):Void

end(?callback:EitherType<() ‑> Void, Null<Error> ‑> Void>):Void

Calling the writable.end() method signals that no more data will be written to the Writable. The optional chunk and encoding arguments allow one final additional chunk of data to be written immediately before closing the stream. If provided, the optional callback function is attached as a listener for the 'finish' event.

See also:

setDefaultEncoding(encoding:String):TSelf

The writable.setDefaultEncoding() method sets the default encoding for a Writable stream.

See also:

uncork():Void

The writable.uncork() method flushes all data buffered since stream.cork() was called.

See also:

write(chunk:Dynamic, ?encoding:String, ?callback:EitherType<() ‑> Void, Null<Error> ‑> Void>):Bool

The writable.write() method writes some data to the stream, and calls the supplied callback once the data has been fully handled. If an error occurs, the callback may or may not be called with the error as its first argument. To reliably detect write errors, add a listener for the 'error' event.

See also:

Defined by Readable

isPaused():Bool

The readable.isPaused() method returns the current operating state of the Readable. This is used primarily by the mechanism that underlies the readable.pipe() method. In most typical cases, there will be no reason to use this method directly.

See also:

pause():TSelf

The readable.pause() method will cause a stream in flowing mode to stop emitting 'data' events, switching out of flowing mode. Any data that becomes available will remain in the internal buffer.

See also:

pipe<T>(destination:T, ?options:{end:Null<Bool>}):T

The readable.pipe() method attaches a Writable stream to the readable, causing it to switch automatically into flowing mode and push all of its data to the attached Writable. The flow of data will be automatically managed so that the destination Writable stream is not overwhelmed by a faster Readable stream.

See also:

read(?size:Int):Null<Dynamic>

The readable.read() method pulls some data out of the internal buffer and returns it. If no data available to be read, null is returned. By default, the data will be returned as a Buffer object unless an encoding has been specified using the readable.setEncoding() method or the stream is operating in object mode.

See also:

resume():TSelf

The readable.resume() method causes an explicitly paused Readable stream to resume emitting 'data' events, switching the stream into flowing mode.

See also:

setEncoding(encoding:String):TSelf

The readable.setEncoding() method sets the character encoding for data read from the Readable stream.

See also:

unpipe(?destination:IWritable):TSelf

The readable.unpipe() method detaches a Writable stream previously attached using the stream.pipe() method.

See also:

unshift(chunk:Null<Dynamic>, ?encoding:String):Void

Passing chunk as null signals the end of the stream (EOF), after which no more data can be written.

See also:

wrap(stream:Dynamic):IReadable

Prior to Node.js 0.10, streams did not implement the entire stream module API as it is currently defined. (See Compatibility for more information.)

See also:

Defined by EventEmitter

addListener<T>(eventName:Event<T>, listener:T):TSelf

emit<T>(eventName:Event<T>, args:Rest<Dynamic>):Bool

Synchronously calls each of the listeners registered for the event named eventName, in the order they were registered, passing the supplied arguments to each.

See also:

eventNames():Array<EitherType<String, Symbol>>

Returns an array listing the events for which the emitter has registered listeners. The values in the array will be strings or Symbols.

See also:

getMaxListeners():Int

Returns the current max listener value for the EventEmitter which is either set by emitter.setMaxListeners(n) or defaults to EventEmitter.defaultMaxListeners.

See also:

listenerCount<T>(eventName:Event<T>):Int

Returns the number of listeners listening to the event named eventName.

See also:

listeners<T>(eventName:Event<T>):Array<T>

Returns a copy of the array of listeners for the event named eventName.

See also:

off<T>(eventName:Event<T>, listener:T):TSelf

on<T>(eventName:Event<T>, listener:T):TSelf

Adds the listener function to the end of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

See also:

once<T>(eventName:Event<T>, listener:T):TSelf

Adds a one-time listener function for the event named eventName. The next time eventName is triggered, this listener is removed and then invoked.

See also:

prependListener<T>(eventName:Event<T>, listener:T):TSelf

Adds the listener function to the beginning of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

See also:

prependOnceListener<T>(eventName:Event<T>, listener:T):TSelf

Adds a one-time listener function for the event named eventName to the beginning of the listeners array. The next time eventName is triggered, this listener is removed, and then invoked.

See also:

rawListeners<T>(eventName:Event<T>):Array<T>

Returns a copy of the array of listeners for the event named eventName, including any wrappers (such as those created by .once()).

See also:

removeAllListeners<T>(?eventName:Event<T>):TSelf

Removes all listeners, or those of the specified eventName.

See also:

removeListener<T>(eventName:Event<T>, listener:T):TSelf

Removes the specified listener from the listener array for the event named eventName.

See also:

setMaxListeners(n:Int):Void

By default EventEmitters will print a warning if more than 10 listeners are added for a particular event. This is a useful default that helps finding memory leaks. Obviously, not all events should be limited to just 10 listeners. The emitter.setMaxListeners() method allows the limit to be modified for this specific EventEmitter instance. The value can be set to Infinity (or 0) to indicate an unlimited number of listeners.

See also: